Aprilia rs 50-Aprilia rs 50

This is the Aprilia RS 50 that look like the new Aprilian rs maybe because those are from the same factory.

Engine type Single cylinder two-stroke, liquid cooled. Light alloy cylinder with Gilnisil coating. Reed intake in crankcase. Balancing countershaft.
Bore and stroke 40.3 x 39 mm
Displacement 49.7 cc
Compression ratio 12 ± 0.5:1
Carburetor Dell'Orto PHBN 12 - HS
Ignition Electronic, capacitor discharge
Starting Electric starter
Generator 12V - 105 W
Lubrication Separate mixing with variable displacement volumetric pump
Gear box Six speed Primary drive Gear Final drive Chain
Clutch Multiple disk in oil bath
Frame Sloping twin-spar in cast aluminium with thin walled structural shell and cross rib reinforcement
Front suspension Aprilia ø 35 mm central pin hydraulic telescopic fork, wheel travel 110 mm
Rear suspension Double member swing-arm in high strength steel with hydraulic monoshock, wheel travel 120 mm
Brakes
Front: stainless steel disk, Ø 280 mm, double piston calliper, Ø 25 mm pistons
Rear: stainless steel disk, Ø 220 mm, single piston calliper, Ø 28 mm piston
Wheels Five spoke aluminium alloy with profile for tubeless tyres; front: 2.50 x 17"; rear: 3.00 x 17"
Dimensions Maximum length 1,920 mm
Maximum width at handlebars 675 mm
Maximum height at windshield 1,155 mm

Seat height 810 mm
Wheelbase 1,280 mm
Tank capacity 13 litres (2.6 litre reserve)
Colours SBK Replica, GP-1 Replica
Price £2,509 OTR